Machine circular PC 2. Tree machines used and new. The greatest distance between the saws, mm

Information about the manufacturer of the circular saw Minno Rack Machine CA-2A

The manufacturer of the circular saw Minno Rack Tsa-2a is Tyumen Machine-Planting Factory , founded in 1899.

Currently, the plant manufactures produces machines of CA-2A-1, CA-2A-2, which are characterized by a more powerful electric motor of a saw shaft and a greater feed rate.

Tsa-2a machine tested by time. His predecessor, the machine model of the Central Tsa2, was launched in production in 1973. Since then, he has repeatedly undergraduated with the expansion of technological capabilities and an increase in power. The power of the saw drive was increased during this time from 11 kW to 22 kW, the greatest distance between the extreme saws changed from 50 to 210 mm, instead of six fixed feed speeds, eight was eight, etc.

According to the reviews of manufacturing machines of the Tsa-2a series - one of the most reliable domestic circular sawing machines. Until now, applications come to the plant for the supply of spare parts or individual parts instead of worn out for machines that have worked at the production of 25 to 30 years. Such durability is explained by the thoughtfulness of the structure and the high quality of the manufacture of the machine.

Conditional designation of woodworking machines

Woodworking machines and equipment have a conditional designation (indexation) letters and numbers. An alpoint indexation consists of the initial letters of the name of the type or type of machine. The first letter means the type, second and third-main sign of the machine.

• C - Circular (Circular, Circular)
• C - Strogal
• F - milling
• W - Sipping
• PC - grinding
• KP - Round Mountain
• U - Universal
• Pr - round edge
• Central Committee - Circular Sureter
• SF - planing fugoval
• Wed - planing and flights
• FSH - milling with a nipsell carriage
• FC - milling with a carousel table
• Sho - nipsens one-sided
• Shd - nipped bilateral
• SP - Nippore for direct spike
• SHL - SPIPRESS FOR SHIPS LASTOW TAIL
• Shld - grinding disk
• SHLPS - grinding with a moving table
• PCP - grinding for saws
• TCH - grinding for knives
• TCPN - grinding for saws and knives

Letter A denotes the presence of automation elements.

For example: SVP-drill-domestic with automatic feed. The figure, standing immediately after the letters or between them, denotes the basic parameters of the machines (the number of cutting tools or width of planing in mm, cm, dm). For example:

• Ts2K12 - two-spindle overpaid for bars 12 dm long
• SF-4 - planing fugoval with planing width 4 dm
• F2K - Milling two-zpindel with a carousel table
• Sho10 - nipionic one-sided for spikes up to 10 cm long

The figure, standing after hyphen, denotes the number of the machine model, for example:

• SF4-4 - fourth model
• CP6-6 - Sixth Model
• CP6-7 - respectively, the seventh model

Tsa-2a Circular saw Minno-Wheel with roller-disk feed for longitudinal sawing boards. Appointment, scope

The Machine Divine-Rack Circular Power is designed for high-performance longitudinal cutting cutting and unedged boards Thickness up to 80 mm on the bars of the required width.

On the machine you can paint and hill with a drop of their thickness (within one porch) up to 30 mm. At the same time, the hill are fed into the machine with a flat surface down.

The machine is applied at woodworking enterprises, sawmills, on construction sites and other industries associated with woodworking.

The execution of the machine provides for the work in a closed heated room.

Features of the design of the machine CA-2A

The location of the saw shaft relative to the workpieces processed is lower. The filing of the billets is made by four rollers: two lower and two tops. The lower rollers are based on the blanks, the upper - they carry them out to the lower rollers. All rollers are driven, which ensures a stable supply of blanks.

High machine performance is provided by the powerful drive of the saw shaft drive (15 kW) and high feed rates (up to 102 m / min). Unlike other machines of this purpose, Central Asia 2a-1 can cut the hill.

In order to eliminate the vibrations of the saw shaft in the spindle node, a dual radially resistant bearing of increased accuracy is applied; The transmission of rotation to the shaft is carried out by one wide polyclinite belt. Upper roller and presser discs are swing around a fixed axis. They press the workpiece with their own weight, which makes it possible to cut blanks, different in thickness, and hill. All feed rollers and discs are corrugated, which provides feeding even frozen wood.

List of composite parts of the Tsa-2a machine:

1. Electrical equipment - CA-2A-90.000
2. SUPP OPTING - TSA-2A-11B
3. Valet's rear feed - Tsa-2a-45
4. Upper feeding mechanism - CA-2A-30A
5. Silent shaft - Tsa-2a-20
6. Fencing of the upper feeding mechanism with a safety curtain - CA-2A-35.000.00A
7. Valet's front feed - Tsa-2a-40
8. Stanina - CA-2A-10.000
9. Clamping mechanism - CA-2A-80
10. Rule guide - CA-2A-60
11. Fencing - CA-2A-52
12. Reducer feed mechanism - CA-2A-55
13. Drive saw shaft - CA-2A-50

Tsa-2a Location of the Machine Controls

List of control bodies Tsa-2a:

1. Upper feeding screws
2. Handle fixing the presser mechanism
3. Turning on and off button of the saw shaft
4. Enable and turn off the feed drive button
5. Circuit lifting handle
6. Main switch
7. Handle fixing the guide line
8. Feed Speed \u200b\u200bSwitch

CA-2A electrical circuit breaker

Technical characteristics of the Tsa-2A machine

Tsa-2A.

CA-2A Machine Circular Point Warm Wheel For Longitudinal Sawing Board

Model: Tsa-2a (Tyumen CVD) In stock Price110000 rub.

Machine Divine-Rack Used with roller-disk feed Tsa-2A. Designed for high-performance longitudinal sawmills of edged and unedged boards and bars with a thickness of up to 80 mm in order to obtain the desired width or edged board at the output.

The Tyumen Machine-Building Plant, founded in 1899, is the manufacturer of the circular sawmill-rack machine Tsa-2a.

Tsa-2a machine tested by time. His predecessor, the machine model of the Central Tsa2, was launched in production in 1973. Since then, he has repeatedly undergraduated with the expansion of technological capabilities and an increase in power. The power of the saw drive was increased during this time from 11 kW to 22 kW, the greatest distance between the extreme saws changed from 50 to 210 mm, instead of six fixed feed speeds, eight was eight, etc.

According to the reviews of manufacturing machines of the Tsa-2a series - one of the most reliable domestic circular sawing machines. Until now, applications come to the plant for the supply of spare parts or individual parts instead of worn out for machines that have worked at the production of 25 to 30 years. Such durability is explained by the thoughtfulness of the structure and the high quality of the manufacture of the machine.

On the machine you can paint and hill with a drop of their thickness (within one porch) up to 30 mm. At the same time, the hill are fed into the machine with a flat surface down. The base of the machine and its bed has a welded and quite rigid construction. The table of the machine is made by a gray cast iron. The housing of the saw shaft, the lower feed rollers and the housing of the upper clamping rollers are mounted on the table, the material of which exits the emerging vibrations. Between the saws, there are space sleeves, the thickness of which is selected depending on the width of the bars of bars. The lower rollers are made steel to increase their wear resistance. To improve the clutch of rollers with wood blanks on their outer surface, longitudinal grooves are made. In places of crossing the surfaces of the grooves with the outer surface of the rollers, sharp edges are formed (ripples), which ensures a stable filing of the billets.

Features of the design of the Tsa-2a Machine: Used:

The location of the saw shaft relative to the workpieces processed is lower. The filing of the billets is made by four rollers: two lower and two tops. The lower rollers are based on the blanks, the upper - they carry them out to the lower rollers. All rollers are driven, which ensures a stable supply of blanks.

The high performance of the machine is provided by a powerful electric motor of the saw shaft and high feed rates. Unlike other machines of this purpose, CA 2A can cut the hill.

In order to eliminate the vibrations of the saw shaft in the spindle node, a dual radially resistant bearing of increased accuracy is applied; The transmission of rotation to the shaft is carried out by one wide polyclinite belt. Upper roller and presser discs are swing around a fixed axis. They pressed the workpiece, which makes it possible to cut blanks, different in thickness, and hill. All feed rollers and discs are corrugated, which provides feeding even frozen wood.

Specifications Central Machine Tsa-2a Used:

Scroll component parts Machine Tsa-2a:

1. Electrical equipment - CA-2A-90.000
2. SUPP OPTING - TSA-2A-11B
3. Valet's rear feed - Tsa-2a-45
4. Upper feeding mechanism - CA-2A-30A
5. Silent shaft - Tsa-2a-20
6. Fencing of the upper feeding mechanism with a safety curtain - CA-2A-35.000.00A
7. Valet's front feed - Tsa-2a-40
8. Stanina - CA-2A-10.000
9. Clamping mechanism - CA-2A-80
10. Rule guide - CA-2A-60
11. Fencing - CA-2A-52
12. Reducer feed mechanism - CA-2A-55
13. Drive saw shaft - CA-2A-50

Tsa-2a Location of the Machine Controls:

CCA2a is intended for high-performance longitudinal sawmills of edged and unedged boards with a thickness of up to 80 mm on the bars of the required width.
On the Tsa-2A used machine, it is possible to cut and pumped with a drop of their thickness (within one porch) to 30 mm. At the same time, the hill are fed into the machine with a flat surface down.

CA-2A Circular Machine Machine with roller-disk feed for longitudinal sawing boards. Application area

The Machine Divine Rack Circular is designed for high-performance longitudinal sawmills of edged and unedged boards with a thickness of up to 80 mm on the bars of the required width.

On the machine you can paint and hill with a drop of their thickness (within one porch) up to 30 mm. At the same time, the hill are fed into the machine with a flat surface down.

The machine is applied at woodworking enterprises, sawmills, on construction sites and other industries associated with woodworking.

The execution of the machine provides for the work in a closed heated room.

Features of the design of the machine CA-2A

The location of the saw shaft relative to the workpieces processed is lower. The filing of the billets is made by four rollers: two lower and two tops. The lower rollers are based on the blanks, the upper - they carry them out to the lower rollers. All rollers are driven, which ensures a stable supply of blanks.

High machine performance is provided by the powerful drive of the saw shaft drive (15 kW) and high feed rates (up to 102 m / min). Unlike other machines of this purpose, Central Asia 2a-1 can cut the hill.

In order to eliminate the vibrations of the saw shaft in the spindle node, a dual radially resistant bearing of increased accuracy is applied; The transmission of rotation to the shaft is carried out by one wide polyclinite belt. Upper roller and presser discs are swing around a fixed axis. They press the workpiece with their own weight, which makes it possible to cut blanks, different in thickness, and hill. All feed rollers and discs are corrugated, which provides feeding even frozen wood.

TECHNICAL SPECIFICATIONS OF CA 2A 01

Tsa-2a Location of the composite parts of the machine

List of composite parts of the Tsa-2a machine:

1. Electrical equipment - CA-2A-90.000
2. SUPP OPTING - TSA-2A-11B
3. Valet's rear feed - Tsa-2a-45
4. Upper feeding mechanism - CA-2A-30A
5. Silent shaft - Tsa-2a-20
6. The fencing of the upper feed mechanism with the preservation of the CA-2A-35.000.00
7. Valet's front feed - Tsa-2a-40
8. Stanina - CA-2A-10.000
9. Clamping mechanism - CA-2A-80
10. Rule guide - CA-2A-60
11. Fencing - CA-2A-52
12. Reducer feed mechanism - CA-2A-55
13. Drive saw shaft - CA-2A-50

Tsa-2a Location of the Machine Controls

List of control bodies Tsa-2a:

1. Upper feeding screws
2. Handle fixing the presser mechanism
3. Turning on and off button of the saw shaft
4. Enable and turn off the feed drive button
5. Circuit lifting handle
6. Main switch
7. Handle fixing the guide line
8. Feed Speed \u200b\u200bSwitch

Excursion to the history of the Central Tsa-2A multi-storage machine (multi-seated Tsa-2a Multi-War Machine)

The Tyumen Machine-Building Plant, founded in 1899, is the manufacturer of the circular sawmill-rack machine Tsa-2a.

Currently, the plant manufactures produces machines of CA-2A-1, CA-2A-2, which are characterized by a more powerful electric motor of a saw shaft and a greater feed rate.

According to the reviews of manufacturing machines of the Tsa-2a series - one of the most reliable domestic circular sawing machines. Until now, applications come to the plant for the supply of spare parts or individual parts instead of worn out for machines that have worked at the production of 25 to 30 years. Such durability is explained by the thoughtfulness of the structure and the high quality of the manufacture of the machine.

Tsa-2a machine tested by time. His predecessor, the machine model of the Central Tsa2, was launched in production in 1973. Since then, he has repeatedly undergraduated with the expansion of technological capabilities and an increase in power. The power of the saw drive was increased during this time from 11 kW to 22 kW, the greatest distance between the extreme saws changed from 50 to 210 mm, instead of six fixed feed speeds, eight was eight, etc.

According to the reviews of the production workers of the Tsa2a series, one of the most reliable domestic circular circular machines. Until now, applications come to the plant for the supply of spare parts or individual parts instead of worn out for machines that have worked at the production of 25 to 30 years. Such durability is explained by the designedness of the structure and the high quality of the manufacturer of the Tsa-2a machine.

CA-2A-01

Model: CA-2A-01 Sold, price________ rub.

Massive machines used Maud. CA-2A-01 Designed for high-performance longitudinal sawmills of edged and unedged boards with a thickness of up to 80 mm on the bars of the required width.

On the machine you can paint and hill with a drop of their thickness (within one porch) up to 30 mm. At the same time, the hill are served in machine Flat surface down. The base of the machine and its bed has a welded and quite rigid construction. The table of the machine is made by a gray cast iron. The housing of the saw shaft, the lower feed rollers and the housing of the upper clamping rollers are mounted on the table, the material of which exits the emerging vibrations. Saws are installed on console plot Shaft via the key, which excludes their turn. Between the saws, there are spacer sleeves, the thickness of which is chosen depending on the width of the drilled bars. The lower rollers are made steel to increase their wear resistance. Their length is 350 mm. To improve the clutch of rollers with wood blanks on their outer surface, longitudinal grooves are made. In places of crossing the surfaces of the grooves with the outer surface of the rollers, sharp edges are formed (ripples), which ensures a stable filing of the billets. The upper rollers are also made by steel and corrugated - with the same purpose. They are console on the shafts.

Features of the design of the Tsa-2a-01 Machine: Used:

The location of the saw shaft relative to the workpieces processed is lower. The filing of the billets is made by four rollers: two lower and two tops. The lower rollers are based on the blanks, the upper - they carry them out to the lower rollers. All rollers are driven, which ensures a stable supply of blanks. High machine performance is provided by the powerful drive of the saw shaft drive (15 kW) and high feed rates (up to 102 m / min). Unlike other machines of this purpose, Central Asia 2a-1 can cut the hill. In order to eliminate the vibrations of the saw shaft in the spindle node, a dual radially resistant bearing of increased accuracy is applied; The transmission of rotation to the shaft is carried out by one wide polyclinite belt. Upper roller and presser discs are swing around a fixed axis. They press the workpiece with their own weight, which makes it possible to cut blanks, different in thickness, and hill. All feed rollers and discs are corrugated, which provides feeding even frozen wood.

Technical characteristics of CA-2A-01:

Machine diversion with roller disk feed

designed for high-performance longitudinal sawmills of sawn timber on bars and rails. High machine performance is provided by the powerful drive of the saw shaft drive (15 kW) and high feed rates (up to 102 m / min). Unlike other machines of this purpose, Central Asia 2 A-1 can cut down the hill.

Design features:

In order to eliminate the vibrations of the saw shaft in the spindle node, a dual radially resistant bearing of increased accuracy is applied; The transmission of rotation to the shaft is carried out by one wide polyclinite belt. Upper roller and presser discs are swing around a fixed axis. They press the workpiece with their own weight, which makes it possible to cut blanks, different in thickness, and hill. All feed rollers and discs are corrugated, which provides feeding even frozen wood.

Machine Divine-Wheel Tsa2a-2 Specifications

dimensions of processed billets (mm) CA 2A -2

width 10-300.

thickness 10-80

length 500-6000

number of installed saws (pcs.) 1-3

the greatest distance between extreme saws (mm) 150

diameter saw (mm) 315-360