How to calculate 1 square meter of wallpaper. Calculation of wallpaper on the room. Required tools. Conduct measurements and counting. Calculation of the estimated height of the canvas

Preceded the mass of preparatory stages. This is the choice of suitable design, and the preparation of the wall, as well as the calculation of the number of wallpapers on the room. In this article we will analyze everything necessary nuances Such a task.

General provisions

Let's give a few words to choose such. Why are they most often used to arrange an internal interior? The reason for this is the presence of many advantages.

Dignity

• Huge range of all sorts of colors and ornamentsas well as used to create products of materials.

• Flexible price. There are, like very cheap models, and incredibly expensive. For this, this affects the presence in the structure of expensive raw materials.

• Simplicity of application with your own hands. Wallpaper sticking does not require special skills and is easy to implement independently.

• Protection of the surface of the walls and masking their small flaws.
• Ease of preparation of preliminary estimates. The calculation of the number of rolls of wallpaper on the room is made much easier than, for example, the counting of the necessary litter of paints and varnishes.

Necessity

You can select the three most important reasons why you need the calculation of the wallpaper rolls:

1. In order not to be without at the peak of repair work. Agree, to run while the glue will dry by stringly in search of a lack of a roll not very fun. Especially since a similar shade may be generally difficult to find.
2. In order not to buy extra products. If we are talking about cheap paper samples, then okay, you can dial with a reserve, in case of the need for restoration. But if it is natural or textile wallpaper, then the extra roll will significantly hit your family budget.

1. And the last reason is that simply you need to know with what amount you need to go to the store.

Consider

You will need the following things for calculating:

Required tools

• Roulette for carrying out the necessary measurements;

• Pencil and blank paper for recordings;

• Calculator to cope with the calculations faster.

Perform measurements

Calculation of the flow of wallpaper on the room will not be correct without precise linear dimensions:

• The first measure the perimeter of the room. Let in our case it will be 18 meters.

• Then the height of the ceilings. It usually is two and a half meters. If you use products with a pattern, you need to add even additional thirty centimeters to fit it.

Tip: It is also recommended to immediately take into account some stock compensating for the irregularities of the walls, and add five more centimeters. Since it is much easier to cut the protruding edge than trying to close the segments of a translucent wall.

• You will also need the parameters of doors and windows. After all, they do not need them, so why buy excess material? For example, suppose that as a result we did eight square meters.

• Width classic wallpapers 53 centimeters equals, and the length is 10 meters and 5 centimeters.

Tip: If you plan to use wallpaper for painting, then pay attention to the labeling of rolls. Since they usually differ significantly in size from standard products, and this must be considered in the calculations.

Formula

Instruction:

1. The perimeter (P) is multiplied by height (H) taking into account the required stock: 18 × 2.85 \u003d 51.3 m 2. This is the total area of \u200b\u200bthe walls (s o).
2. But in the room there are door and window openings (S P), which we fired in advance, therefore 51.3-8 \u003d 43.3 m 2, which will be the final area (S and).
3. The surface of the roll is learning to multiply its length (H 1) to the width (H 2) 10.05 × 0.53 \u003d 5.33 m 2 (s P).
4. We divide the required area of \u200b\u200bthe coating on the area of \u200b\u200bone roll and we get: 48.3 / 5.33 \u003d 9 rolls of rolls is necessary for the complete finishing of the room under consideration.

The united formula for calculating wallpaper on the room will look like this: (P × H-S n) / (H 1 × H 2). You can only substitute the data that you receive after the work of all the necessary sizes: P is the perimeter of the room, H is the height of the ceilings with an adjustment to circumcision, S P is the area of \u200b\u200ball available openings, H 1 - the length of one roll and H 2 - it width.

If you are going to combine different wallpaper models, simply apply markup on the walls and in accordance with it measure the individual parameters for each of the finishing types.

Tip: In case of difficulties in carrying out calculations, it is recommended to use one of online calculatoroV .. They will require you only to enter the parameters of your room.

Output

The number of required wallpaper rolls should be known before the hike in the store. So you are much more accurately planning the estimate of the repair work. To do this, you will need linear dimensions of the rooms and the parameters of the products used.

The video in this article will introduce you to additional materials.

Perform calculations carefully.

Seven times measure cut once. With folk wisdom will not argue, especially when you need to independently calculate the wallpaper on the room.

The remaining pieces remaining, and even more so extra rolls are not suitable for anything (yes, we always leave "to stock", but usually rarely use). On the other hand, if you need to buy wallpaper, you can get to come. After all, the shade of the wallpaper can sometimes differ from the party to the party.

So facing rational owners the question of how much the wallpaper needs to buy, so that it is enough for pasting, and there is no extra meters.

Working with the program is more than simple, the calculation formula is intuitive, it is enough to specify the size of the room and the characteristics of the wallpaper. But, in several nuances I would like to draw your attention.

How to calculate how much the wallpaper is on the room

• length, width and perimeter. If you have a simple room configuration, specify its length and width. And if complicated, then the perimeter;

• width of wallpaper. Indicates a working width, because There are still wallpapers that must be glued;

• rapport - Basic element of the ornament on the wallpaper canvas.

• bias. Shows what magnitude is the rapport on the wallpaper. Usually, this value is indicated on the roll. The desired strip length will increase on the same value.

• the height of the room is indicated with a reserve of 5 cm. It is necessary to avoid the lack of the length of the wallpaper strip when the heights and the reserve on a beautiful trimming.

Please note the windows and doors are not deducted from the perimeter of the walls, because Their location affects the glitter of wallpaper. If necessary, this can be done independently. Material prepared for WWW.Site site

Wallpaper Table - Calculation of Wallpaper Consumption

In addition to the calculator, the method is used - the calculation of wallpaper on a table with standard parameters. Of course, the results are approximate and to the resulting quantity it is better to add an additional roll.

Table No. 1 - calculation of the number of rolls of half-meter wallpaper

The width of the roll of half the meter (0.52 cm) and 10 meters long (10.05 m)

Table number 2 - calculation of the number of rolls width 70 cm

Roll width 70 cm (0.68 m) and 10 meters long (10.05 m)

Table number 3 - calculation of the number of wallpaper widths in one meter

Roll width 1 meter (106 cm) and 10 meters long (10.05 m)

Sometimes the length of the wallpaper can reach 15 meters, so the calculations will have to adjust under the existing length.

Calculator for calculating wallpaper on the room

Below is the program - online wallpaper calculator, which will help determine the consumption of wallpaper: paper, vinyl, phlizelin, textile and fiberglass.

You finally decided to cross the wallpaper in your room? It's time to retire old wallpaper and you are interested in how to calculate the number, do you need a lot of rolls? The answer is next ...
The most common wallpaper size is 10 meter rolon wide in a meter of 10 mx 0.53 m. It is enough for a salabing of about 5 square meters of wall and or ceiling. There are rolls of wallpaper 15 * 0.53 m, 10 * 1.06 and 25 * 1.06 m.

Calculation of wallpaper

1. first measure the perimeter of your room. Do not forget to remove the perimeter of the surface not subject to salary, these are windows and doors, (6.5 + 4) x 2 \u003d 21 m.

1. And then, divide the resulting number to the roll width (usually 50 cm). The resulting digit shows the number of bands, 21 / 0.53 \u003d 40 strips.

1. Measure the height of your walls (do not forget to add a small supply to subsequent circumcision, say 5 cm) 2.50 + 0.05 \u003d 2.55 m

1. Then count the number of bands in the roll, 10 / 2.55 \u003d 3

1. Now divide the number of bands by the number of strips in a roll to determine the number of rolls, 40/3 \u003d 14 rolls

Special cases

If there are ledges or recess in the door niches, add 1-2 additional wallpaper rolls.

If you are using wallpaper with patterns, it is necessary to add a supply to the calculation of the height to fit the pattern: 2.50 + 0.05 (excess) + 0.30 (facing pattern) \u003d 2.95 m.

Calculation of the ceiling

With ceiling, everything is similar. However, the last time of the ceiling pasting with wallpaper does not look elegant. Today there have been many embossed slabs for the ceiling, which look more organically and aesthetic.

Do not forget to purchase one or two wallpaper rolls additionally. Especially if the connections go in a checker order, as well as their errors, the offset is higher and lower.
- Be sure to pay attention to the number of the wallpaper series. If the series is distinguished, then the difference in color and brightness will be noticeable after pasting.

How to save?

If you are mistaken when calculating, and the purchase such wallpaper is no longer possible, you can purchase similar. And some of the walls to arrange other wallpaper. In fact, this option looks very modern and non-standard. At the same time, species zones will change, that is, from different parts The rooms will be different, which will also be pleasantly affected by her perception.
An option with no salary for a sofa and a lover cabinet.

Calculator to help you

If you are not confident in the calculations, you can also use the finished table to determine the number of rolls of wallpaper:

Use the following table to calculate wallpaper:

	Perimeter room (in m)

Roll size 0.53 / 10.05 m \u003d 5.33 m2

Perimeter room (in m)

Roll size 0.53 / 15m \u003d 7.95m2

Perimeter room (in m)

Roll size 1.06m / 10.05m \u003d 10.65 m2

Perimeter room (in m)

Roll size 1.06 / 25m \u003d 26.50m2

From the size of the room (about this below) and from the design. In one roll, 10 meters are usually 10 meters. If the wallpaper is one-photon, and the ceiling height is 2.5 meters, you can cut the roll into four strips. If the drawing will have to customize, the bands will be three.

Stroyday.ru.

No compatibility of the picture: the roll is simply cut to the desired cloves. Usually this monophonic wallpaper, wallpaper S. abstract pattern or vertical strip.

Stroyday.ru.

The drawing will have to be combined horizontally so that the adjacent bands begin with the same elements. And here everything will depend on the height of the rapport - the distance through which the drawing is repeated (indicated on the label). In the worst case, it will have to throw out almost the full height of the rapport, so when calculating it must be added to the height of the ceiling.

Stroyday.ru.

The drawing is diagonally, so each canvas shifts. As a rule, half of the rapport. In this case, the height of the ceiling must be added to the height of the rapport and the displacement value: both numbers can be found on the label.

How to calculate the number of wallpapers using tables

This is the perfect way if the room is square or, and the wallpaper does not require fitting. Need only the area of \u200b\u200bthe room and the ceiling height.

Calculation of quantity narrow wallpapers (Width - 53 cm, length - 10 meters).

Remont-otdelka-m.ru.

Calculation of quantity wide wallpaper (Width - 106 cm, length - 10 meters).

Remont-otdelka-m.ru.

How to calculate the number of wallpaper mathematically

If the room has a complex shape, there are bends and niches, it is better to count around the perimeter. To do this, add the lengths of all walls. Window I. door loans less than 60 cm equal to smooth wall, wider excluded from. The resulting value is rounded into the biggest.

Example: 2.75 m + 3 m + 0.4 m + 2.85 m + 4 m + 0.65 m \u003d 13.65 m ≈ 14 m.

Then it is necessary to determine the number of strips: divide the perimeter to the roll width. Let us return to our example: 14 m / 1.06 m \u003d 13.2. Rounded into the biggest - 14 Wide wallpaper wastes. For narrow wallpapers: 14 m / 0.53 m \u003d 26.4. That is, 27 lanes.

Now you need to determine how many bands can be obtained from one roll: the length of the roll must be divided into the strip length. And then there may be three options:

1. If the wallpaper does not require fitting, the strip length is equal to the ceiling height. 10 m / 2.75 \u003d 3.6 ≈ 3.
2. If the wallpaper with a straight docking, the length of the band is equal to the sum of the ceiling height and the height of the rapport (0.6 m). 10 m / (2.75 + 0.6) \u003d 2.9 ≈ 2.
3. If the wallpaper with a combined docking, the length length is equal to the amount of ceiling height, the height of the rapport (0.6 m) and the displacement value (0.3 m). 10 m / (2.75 + 0.6 + 0.3) \u003d 2.7 ≈ 2.

Last step: the number of bands we need to divide on the number of strips in the roll. If the wallpaper is wide, 14 should be divided into 3 or 2. If narrow, divide on 3 or 2 will need 27 bands.

How to calculate the number of wallpapers using services and applications

Most fast wayIf you know the settings of the room, and the easiest, if you are not friends with mathematics. There are many wallpaper calculators in the network, just a few kind.

• Calc.by Wallpaper Calculator. It also believes in the area, and around the perimeter, it allows you to exclude the door and window pasumes from the calculation. You can also set the width and rode of the roll.
• Calc.ru wallpaper calculator. Makes the perimeter calculation. It helps determine how much wallpaper and glue.
• Wallpaper Calculator from Remont-online.com. First, the room configuration is selected, then the width of the walls and wallpaper is driven. You can also specify the price for the roll to find out the final cost of pasting.

If you are already in the store, use the application to calculate the application. Here are two free with a good rating. non-food goods of proper quality that are not refundable or exchange is decoration Materials. But it is only about goods released by meters.

Wallpaper remained unrealized, do not remember and not scratched.

From the moment of purchase, no more than 14 days passed. When buying online - 7 days.

There is a check or other document confirming the fact of purchase. If the check is not preserved, you can request a cash register (stores store it for a month) or attract witnesses.

In other words, if the wallpaper broke out, you can attribute them back to the store. All rolls. In this case, the seller will offer you a similar product, and if there is no such, you can write a statement about the return of money.

Return one or two unnecessary rolls after will be problematic. But large stores usually go to buyers. After all, they buy wallpaper with large parties, and plus-minus one roll does not particularly affect the implementation. Customer loyalty is more expensive.

Just in case, specify the return conditions before purchasing.

Good afternoon! You can calculate wallpaper on the square of the room in several ways. In addition, the calculation of the amount depends on the pattern on the wallpaper, the method of sticking is whether there is a need to customize them or they glue in a row, without selection.

Wallpaper is a magnificent look of finishes, there are a great set - for every taste. It is desirable to calculate wallpaper as much as possible so that there are no many waste left, and most importantly, the purchased number for the room is enough.

How to calculate wallpaper

We ask the size of the room:

• Width \u003d 3 meters
• Length \u003d 5.5 meters
• Height \u003d 2.5 meters

To determine the sticker area, you, the perimeter is the sum of all sides of the room, multiply on its height. In numbers it looks like this:

3 + 3 + 5.5 + 5.5 \u003d 17m x 2,5m \u003d 42.5m2.

Now from the total area it is necessary to subtract the area of \u200b\u200bopenings - this is the door and a window or two. We measure the tape measure and the height of the window - all of them are different, but we use the size of the area - 1, 5x1.5 \u003d 2.25m2 .

If you are present and balcony doorthen I propose all balcony block Calculate together as a rectangle, since the battery is usually located under the window. Then the calculation will be: 1.7x 2.35 \u003d 4m2, like me.

Consider the door to the room. In area, it will be equal to 2.1x 0.8 \u003d 1.7 m2

Now we will make calculation of the final need of wallpaper:

42,5m2 (total area) - 2.25 (window) - 1.7 (door) \u003d 38,6m2.

Or with a balcony, then 42.5 - 4 - 1.7 \u003d 36.8m2.

Now you should choose the wallpaper to know their length and width and determine how much rolls need. For example, you chose 10 meter and 0.53 meter width wallpapers, then the roll area \u003d 5.3 m2. You need to take 38.6: 5.3 \u003d 7.3Rulone, that is, 8patuk.

Wide wallpaper

If the meter wallpaper, then the roll area \u003d 10,6m2 and you will need 38.6: 10.6 \u003d 3.64 or 4 intensities. If you plan to glue them, check out the article - how to glue a meter wallpaper.

Suddenly someone decided to stick the wallpaper of two colors, then you can read this in the article - sticking wallpaper of two colors. The overall need of wallpaper will remain unchanged, only divide them to different colors.

My work painters in their own way the number of wallpapers in their own way - they do not need the area, as the girls count the number of bands on the old wallpaper on the walls. If the wallpaper is already removed, they measure the width of the wallpaper with a roulette and apply a predetermined width around the perimeter of the room, calculating the number of strips. Suppose it turned out 26 points, it means that you need 26: 4 \u003d 6.5 rolls. Round up to seven. And you know, they consider it no worse than I with my arithmetic computing.

Calculation of wallpaper with a selection of drawing

• Wallpaper with the selection of the drawing can be calculated by the same principle by determining the walls of the walls. To find the pattern you need to shift the canvas for 15-30cm. So consider that from each roll will take up to 1.2 meters (4 bands x 0.3 m offset). That is, there are 3 whole canvas and a piece. With that, there is a pattern - the larger the pattern largest, the more you need to shift the wallpaper for the selection.
• Of course, it is possible in order to save, and we all strive for this, these pieces to put into the case and go around the wall behind the wall, a wardrobe and other objects. This is especially true if the wallpaper is expensive, and we are financially economical. There are different situations.
• But I want to tell you that there is no wonder that "Gol on the fiction of the cherry." You can combine the bottom or the top of the wall from these meter or half-and-half meters, and the second will be from the wallpaper of another tone, textures. Or make an insert into the wallpaper of another room. Here you are and waste-free production, and originally get on design.

Now there are many tables and "calculators" of counting, but I am a "unbeling froth" and I think I myself, measure and compete precisely on the foregoing method with you and shared.