Wooden vases look very beautiful. Usually done on the lathe. But 90% of the tree turns into a chips.
There is a technology that allows you to make a vase from a flat shield.
That's what it turns out:
Long chose the material for the sample. On the one hand, I want something interesting, on the other - so that it was not sorry to ruin.
As a result, I stopped on the nut, with inserts from oak and wenge.
Walnings 75mm width and 15mm thick cut into 3 parts.
Oak 4mm veneer must be cut to 15mm dice.
How to do it, if there is no circular saw, but there are a pair of clamps and cutting saw?
This is how - the pist is clamped between walnut dies ...
And sawing.
As a result, it turns out a smooth cry of the required thickness:
Blooming the nut into the shield with spacers - two oak dies, between them a thin veneer wenge. (who saws on the same technology)
Spent scratches from saws. Small inaccurability, plus solid oak, which saws along the fibers.
It is not scary, still the shield will have to grind to align the stroke errors.
And again gluilding with spacers, leave for the night:
Ribbon grinder Align the shield, remove the remnants of the glue. Probably, it was worth making a wenge continuous:
It turned out a 14 mm thick shield. Each side left 0.5 mm.
Based on the shield and the desired dimensions of the vase, an angle and step is selected:
Print the drawing, with the help of sewing combining the centers of the shield and drawing, sticking the drawing:
I drink a small rake at an angle of 38 degrees:
Fixing the shield by clamps on the table Lobzik and using the rail as a guide, drill a 2mm boring bormer at an angle of 38 degrees:
I felt in the hole Pilk:
And go!
Slap the first ring:
And here it is donyshko!
Wood very firmly, drank slowly, slightly flink - the carriage bursts. To replace the peel, you need to return the table into a horizontal position, unwind the fastenings of the sawmill, to make the shield, set up 38 degrees again, adjust the tension ... and the pedel is almost always rushing, when 3 cm remains until the ring is completed.
The second ring, the picture begins to emerge.
View from below:
And after the fourth rings, the pinks ended. Spent one and a half packs. No more, I postpone on tomorrow.
I drove the store, bought 8 packs of pylons (so that I certainly had enough), sawed:
Shift rings:
Agility of hands and no fraud, rings fold in a vase:
You can combine with a shift. You can make inserts between layers. Options mass.
I start glued until without the bottom, so that it is more convenient to grind the inner surface:
Checking the alignment of the layers:
Leave for the night under load:
Result. The surface is rough, but alignment of lines without serious disorders.
Damage - traces from drying with an ultra-thin sawdow (41 inch tooth), which was tone in sawdust and the tree was burning.
It is necessary to level the inner surface.
Attempting number one is a steel rod with a twin-sided scotch flap.
Not an option, too flexible.
Attempt number two, grinding drum on the same spindle.
Also does not fit, the machine is easy (as I thought about it). Does not hold, plus it is inconvenient to work.
Attempt number three. Grinding drum on a bending sleeve.
The drum is small, sawdust fly to where the least needed, but you can work:
For thin grinding, we collect petals 400 sandwits:
But it does not grind. I continue my hands.
It takes a lot of time, the surface is far from the ideal.
I detect an error - the penultimate ring is inclined with a displacement of 180 degrees.
Well, will be a reminder ... In the end, it could be much worse. Let the charm give - it will be a cut. The main thing, spacers are normally combined.
The sweat, pouring eyes and falling on the vase.
The respirator was once snow-white:
Insert the Donets. To accelerate the process as a press, I use my weight with dumbbells in your hands ... Vase is withstanding more than 100 kg without a screet, despite the lightness and thin walls. Now I think, and what would be if the Vaz had scattered?
Wooden vases fit perfectly into any interior, and external species They are able to give a wraul design and serve him with an emphasis. To decorate in this way housing, it is not necessary to spend a lot of money on their acquisition.
Wood vase do it yourself
In order to make such a vase with your own hands, you will need the following tools:
Preparation of workplace
As usual, the first thing you need to equip your workplace on which you will work. The rules are not complicated: on the table there should be no extra things, the entire tool must lie in their places and be at hand. Not everyone has its desktop and surely you have already thought about creating it. Make the table is not difficult - it is harder to choose a place in the house for him. A good option - This is a warmed balcony where you can start working on a cradle at any time. If you have a specially equipped room with a workbench, then you can say lucky. In a separate article, you can read about where I tried as you can describe the entire process of its creation. After the workplace creation process has completed, you can proceed directly to your future handicraft.
Choosing plywood
The main elements will fit on the Fannery of A4 format, as some details are required to do in several copies, then you will need several blanks. The plywood thickness should be from 2.5 to 3 mm, and depending on the thickness, it is necessary to drink on an internal or outer contour, it is relevant for the grooves in which the elements of the craft are inserted. Before translating the drawing to the Faneru, pollute the workpiece with a large grain, and then small. Wrap the wooden lump by sandpaper, and then proceed to grinding. Grind the harvested Phaneur along the layers, and not across. A well ground surface should be smooth, completely smooth, glossy-matte on light and silky to the touch. Pay attention to the location of the fibers, swirls, dents and other vices. Quality and color. If the plywood is not very high quality and is stratified when drinking, read the Recommendance Recommendations. 
Figure Pattern
You need to translate the drawing accurately and carefully: the drawing will fasten with the help of the buttons, two-way painting tape or simply hold the left hand. Check if the drawing is suitable for dimensions. Separate parts place so that the plywood sheet is more economical. It is not worth a hurry, because your future handicraft depends on the drawing. If the time is not enough, then to speed up the translation process, you can use the technique of quickly translating the drawing, for this I suggest familiar with the article in the Tips section :.
Dumping Vase from Plywood Lobzik
Rules for drinking a lot, but need to be based on the most common. First, you should cut the internal elements then start the discharge of the circuit. When drinking is no need to hurry. The main thing, when drinking, keep always right at an angle of 90 degrees. Put the details on exactly the lines. Lobzik movements should always be smooth up and down. Also, do not forget to follow your posture. Try not to allow SKOs and irregularities. If when drinking you left the line, you should not worry. Such squeezes, irregularities in the subsequent can be removed using a flat file or "coarser-grained" skins.
Relaxation
When drinking, fatigue occurs. Often tired fingers of hands as well as eyes that are always in tension. When working, of course, everyone gets tired, but in order to reduce the load, make a pair of exercises. You can watch exercises. Take several times during the work.
Build Vase from plywood
Assembling details of the vase in this work is simple. When assembling, look at the drawing. If some details are not included in the necessary details - sign them. When the craft is going without any problems - glue it. Bloom the dish is needed with the help of "PVA" or "TITAN". You do not need a lot of glue.
Laccination crafts
At the request of the dish, it is possible to cover with a marilka under valuable wood species or simply transparent, it is not necessary to do this, but it will give a large personality to your craft. Try to choose good and high-quality varnish. Produce using a special brush, do not hurry. Try not to leave visible divorces of bubbles and vile from the brush.
Large floor decorative vases for the interior are a stylish decoration element. Agree, the handicraft from wooden circles looks spectacular?
We will create it with your own hands with the help of small spikes of the tree - round in cross section. We will not need entire trunks, only branches from about one to three centimeters in diameter, as well as the basis for which we will clipped small wooden parts.
Materials for a vase from wood do it yourself
As I mentioned, we need a weigh branch branches, quite a lot, depending on the size of the vase, or rather, more from its surface area.
You still need something that would serve as the basis of our craft. They can have anything, even a simple cans, as you see in the photo below, or a flower pot.
It would be better for the tin surface to be so visible, so it is possible to first reorganize it, for example, with a twine or sack paper. Despite the fact that this work is completed too rudely, the flowers in it look pretty cute.
If you have a vase with a defect, for example, with a crack, or broken - not trouble, it can be useful for us. Breated we first shake. Surfaces and cracks on it will still not be visible - we reorganize it with a tree.
The simplest thing is to find the finished reason for our interior vase, but in principle there is another way to make it yourself. It could be a papier-mache vase, you can utilize a lot of unnecessary newspapers. Then the product will be very easy and better will make it another form, more stable.
Or make it from clay, and insert an ordinary glass jar or a bottle insert, so that the vase can be used not only as a decorative object of the interior, as well as in direct purpose - to put flowers or twigs into it.
Spila is better to carefully clean it with the front side that will be visible for us. Zzabrin and special irregularities should not be, we do not want to scatter. To remove the bark or not - this is your personal business as who likes or what effect you want to achieve.
Still cook good glue, we will stick these smallest rounds.
Decorative Vase - Production
The tree can be treated with a verse or leave as it is, this is a matter of taste and personal preferences. It would be nice to consider where the decorative vase will be, in which interior. Under the light furniture, sleep is better to leave as it is, do not paint.
If the tones of the furniture are dark, then you can part of the wooden parts or everything is immediately processed to give them a darker shade.
The color is left natural, natural, well visible texture of a tree - circles. I almost forgotten - the sleeves should be all the same thickness so that in the end the vase has a flat surface.
Now proceed to work, actually creating your designer work - a decorative floor vase from the tree. We select in size and glue a speech so that the closed turned out to be as much part of the foundation.
Between big glue small pieces like a mosaic. You can start with anywhere, as you like more. But it is better, I think, start with the most flat (least convex) part.
When everything is glued, you need to give a product well to dry. From above, a decorative wooden surface, if desired, can be covered with varnish.
This is how the outdoor decorative vase looks like in the interior. It is made of natural natural material, gives the room warmth, creates a style. It will look good for various beautiful twigs collected in the forest, or stems of dry plants.
If inside is a tank of a type of can or a bottle that does not pass water, then our vase can undoubtedly be used for fresh bouquets.
According to a similar principle, vases are made by simpler forms in the photo below. Wooden kreagashi can first treat the veil to give color. Or leave as it is.
An interesting pattern on the texture is created by alternating circles of different diameters. Some bodies of the tree have their own unique pattern on the cut, it adds originality.
Products from natural natural materials, in particular wood, have gained extraordinary popularity recently. You can browse some ideas on sale, and then repeat yourself for the interior of your own home.
It may be not only vases, but also other small decor items, even whole walls, furniture.
You may be interested:
Examples of interior decoration, when natural natural materials are also used. This time the decor is made with the help of slaughter cuts of plants growing near the water, in shallow water. This is all famous reeds, Rogoz, as well as other types of swamp vegetation, Air, Sitnik. The same way can make decorative animal figures.
Another example of creating a vase from natural materials - branches, corping, as well as a small glass container. Very cute and at the same time uncomplicated in the manufacture of wooden crafts for the interior. You can not process the wand at all, you only need to drill several holes in it for the vessel with water and fastening the cords.
Very unusual unique vases can be made on a lathe (who can, of course). I liked it very, I could not pass by, so such a post arose. It can be used both in direct intended, and in decorative purposes to create a unique interior. The more interesting the structure and drawing of wood, the more flaws, irregularities, the better!
Decorating the vase in the technique glass mosaic. The base is glass, surface cladding too. In almost any irrelevant form, it will not be suitable for all that is too small, such as a flask for the suspension vase. Inside the article, there is another unusual method of interior decoration - the creation of a decorative inner surface of a wide bowl of wood due to moseline mosaic tiles.
The history of wood processing on the lathe has more than 2 millennia. Progress does not stand still, the tools and the machine itself will be enhanced. Instead of 2 people, as at the very beginning of the turning case, it is serviced by one master, and the rotation of the part is set with the help of electricity. Still, wood has to creative processthat allows masters with your own hands to create original elements Interior decor, souvenirs, wooden dishes, carved furniture and more.
For making your own hands, cans from a tree under the bulk products, cylindrical boxes under jewelry, matretory and other souvenirs are used wood with various density characteristics, fragility and humidity indicators. Before starting the sharpening, it is necessary to calculate the load that the type of wood can withstand to work. In many respects, success will be dependent in production, especially if a sharp narrowing of the part of the tree is assumed, for example, for a carved thin leg. Small miscellane with the pressure of the cutter on the workpiece processed, and you can start everything first.
On tokar tabletop from manual type Processing a lot depends on the skill of the master - the loyalty of his hand and the accuracy of the chamorer. The sharpening can be conducted both along and alternate wood fibers. In the manufacture of wooden utensils, the drawings are not mandatory. The beauty of deep bowlers often depends on the choice of wood. Coniferous trees They have more smooth annual rings, which allows for uniform in the tree, when combining the center of the trunk with the axis of rotation, create products with a pattern repeated in the period. Deciduous rocks depend on dryness or humidity of the year, so annual rings can be very different. True, for the storage of vegetables and fruits in a fresh form, wooden containers are less effective than coniferous due to smaller resins.
So that the capacitance with the lid closed hermetically, should not be neglected with drawings. To make your own hands a whole set of identical tanks, the easiest way is based on the drawing and repeated recalculation of the size of creating a stencil. You can work with the template only if there is a device on the turning machine for mounting the cutters and a copier. On this machine, you can not just create single products, but also put on the flow of sets of objects of wooden home utensils.
The sharpening of such products as balusters for decorating the porch and stairs, arbor buildings, better so that the copier is more reliably on the lathe than hope for your own eye. No matter how skillful was the master and how well did not keep the cutter, more reliably than on the copier, reproduce the previous product will not be able to reproduce. There are no obstacles to the masters with a perfectly owned cutter to create a multi-layer thread on the lathe, which will become a decent decoration of furniture - the backs of chairs, headboard beds.
A separate type of art can be considered to look at paintings and saints - it is capable of making a high-end master, capable of thinking volumes and create multi-layer copiers. It is less difficult in terms of transferring a planned pattern to a wooden workpiece using machine tools equipped with CNC. For the release of a single product, you will need a lot. The accuracy of the carved painting on the CNC machine is different from the manual carving of the tree in the lack of physical effort from the Master. Unlike a person, the machine "Hand" does not get drogle - all elements will be made in accordance with the laid by the program.
For playgrounds, even in cities are increasingly installed not metal playgrounds, but wooden. The tree gives a greater flight of fantasy to the masters. Making a swing for their children and grandchildren, many will remember horses on bent polls. On the home turning machine, you can make the sharpening of individual elements of such a rocking toy, after which with the help of joinery glue collect the toy together.
You can make it yourself from the tree on a conventional lathe with an additional fastening - a tableby, a carved casket. By selecting a suitable pattern or ornament, it must be transferred to flat blanks of the lid and walls using a pencil and a copy paper. Cutting ornament is carried out by a hand tool. Applying decorative threads to round or cylindrical boxes is also made by a manual tool, only the blank can be attached in the spindle without a clips of the backstone, which will be interfered when applying the vertical elements of the pattern to the part horizontally fixed on the machine.
The peculiarity of the manufacture of souvenirs on the lathe is that they first perform all actions to create an external and internal silhouettes of the product, adorning carving is applied, only after that the finished item is separated from the total volume of the workpiece.
Vases can become an excellent interior decoration. Some of them can even be created with their own hands. Vases can be decorated and transformed very quickly, even personally. This will allow you to create more and more distinguishing features in the interior.
1. Original Filling Vase
Excellent option Filling a vase with wine plugs, with which the vase is immediately transformed.
2. Lemon vase
Simple, but at the same time a very bright version of the design of the vase with the help of lemon decor, which will be just a find.
3. Small vases from bottles
Beautiful option to create a lot of mini-vaz do it yourself from ordinary bottles.
4. Vase decorated with beads
Transform and decorate the Vase is possible with the help of beads, which will create a truly beautiful vase for a minimum of time and money.
5. Wooden Vase Decor
Cute design of the vase with the help of branches, which will give ease and unobtrusion in the interior of any of the rooms.
6. Stylish and simple vases
Beautiful design of small vases that will decorate any house.
7. Vases are decorated with a cord
With the help of the thread or cord, it is possible to create unforgettable vases, which will be simply an excellent solution for the decor.
8. Registration of a conventional bottle
An exception option to issue an ordinary bottle in the form of a beautiful vase, which will definitely like it.
9. Bottles transformation
A pretty solution to create beautiful vases from ordinary bottles, which will be a find.
10. Decoration of Vaz Sequins
The original solution for the design of the VAZ with the help of gold sequins.
11. Cute shiny vase
An excellent option to create an original and pretty shiny vase, which will decorate any interior.
12. Vase is framed under the candlestick
One of the rapid and simple optionsSo it is creating a candlestick vase.
13. The perfect combination
If you encincherd several bottles of the same form, it is possible to get such a non-standard vase with cells.
14. Vase from the twigs of a tree
Cute and very interesting option Create a Vase from the branches of the tree, which will convert the interior of any room.
15. Bright painting of bottles decorated under the vase
An excellent and very interesting version of the painting of the bottle, which became a vase very quickly and simply.
16. Original lugged bottles
Decorating bottles is a very interesting and difficult moment that you should take note and use the maximum in practice.
17. Vase decor with pencils
The original option to decorate the vase with the help of ordinary color pencils, which will become a find for any interior.
18. Bottles design thread
A pretty idea to decorate ordinary bottles with the help of a thread, which will be just a discovery and will create original vases.
19. Decoration of a conventional transparent vase
Fast and simple decor of ordinary vases that in as soon as possible Transform interior.
20. Painting Wine Bottles
Decorating wine bottles with hand painted, which may be even more attractive than that.
21. Vase decor with wood
The original design of a vase for flowers with a tree, which looks charming and gently.
22. Non-standard wire vases
Beautiful and perhaps the very original option to create a wire vase, which looks very interesting.
23. Open decor table
One of the best and simple options for designing a table with a pretty vase, which will have to do.
24. Cute vases with their own hands
With your own hands it is possible to decorate any of the VAZ in the most diverse way, which will accurately like and inspire.
25. Successful Vase Decor
A pretty solution to reflect the usual transparent vase with burlap and accessories.
26. New Year's vases
An interesting decor of VAZ on New Year's style, which will be just a highlight of any interior.
27. Original vase with transparent bottom
Cute and very interesting example Vases with a transparent bottom, which will become a feature of the interior.
